Engine - GM (19435440)
Engine 19435440
Engine - GM (19435440)
Engine 19435440
- GM
- 19435440
- 19333157, 19417618, 19417624, 19432101, 19433039
Details
- Brand:
- SKU:
19435440
- Description:
THE FOUNDATION FOR A HIGH-REVVING 350 SMALL-BLOCK!
Our SP350/385 crate engine incorporates modern technologies such as a beehive-type valve springs to take the classic 350 Small-Block to new levels of high-rpm performance - without sacrificing the signature torque that has made it the benchmark of V-8 engines for nearly half a century.
In fact, the 385 hp rating of the engine is complemented by excellent low-rpm torque, with the SP350/385 generating 405 lb.-ft. of torque at 3,600 rpm. It's all due to the high-flow, lightweight aluminum cylinder heads. They're based on the proven Fast Burn design, with large intake runners and 2.00/1.55-inch valves. The beehive valve springs enable greater high-rpm performance and durability, allowing the engine to rev higher to make the most of every cubic foot of air drawn through it.
As with all of Chevrolet Performance's Small-Block crate engines, the SP350/385 is built with a cast-iron block with four-bolt mains. It also features a forged steel crankshaft, an aggressive hydraulic roller camshaft and durable, highsilicon pistons. In this value-driven Base crate engine package, it also includes the intake manifold, distributor, water pump, damper and flexplate. Other accessories are required to finish it - all available from Chevrolet Performance.
TECH SPECS
Part Number: 19333157
Engine Type: Chevy Small-Block V-8
Displacement (cu in): 350
Bore x Stroke (in): 4.000 x 3.480
Block (P/N 10243870): Cast-iron with 4-bolt main caps
Crankshaft (P/N 12670965): Forged steel (shot peened)
Connecting Rods (P/N 10108688): Powdered metal
Pistons (P/N 10159436): Hypereutectic aluminum
Camshaft Type (P/N 10185071): Hydraulic roller
Camshaft Lift (in): .474 intake / .510 exhaust
Camshaft Duration (@.050 in): 208° intake / 221° exhaust
Cylinder Heads (P/N 19300955): Fast Burn aluminum; 62cc chambers
Valve Size (in): 2.000 intake / 1.550 exhaust
Compression Ratio: 9.6:1 nominal
Rocker Arms (P/N 10089648): Stamped steel
Rocker Arm Ratio: 1.5:1
Recommended Fuel: Premium pump
Ignition Timing: 36? Total @ 4,000 rpm
Maximum Recommended rpm: 5,800
Balanced: External
Flexplate (P/N 14088765): 12.750"
Intake Manifold (P/N 12366573): Dual Plane
INSTALLATION NOTES- Use the Holley 770-cfm 4-barrel carburetor P/N 19170093 to achieve the listed horsepower and torque
- Requires four-barrel carburetor, spark plug wires and additional components to complete assembly
- Comes with 12.750" externally balanced 153-tooth automatic transmission flexplate. Requires externally balanced flywheel for manual transmission.
- Requires fuel line from fuel pump to carburetor
- Designed for pre-1976 street vehicles or any off-road vehicle
- Some assembly and minor engine tuning required
- Not intended for marine applications
- Replaces:
19333157, 19417618, 19417624, 19432101, 19433039
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov - MSRP: $10,102.63
- Discount: $1,843.73 (18.3% off)
- Sale Price: $8,258.90
- GM
- 19435440
- 19333157, 19417618, 19417624, 19432101, 19433039
Details
- Brand:
- SKU:
19435440
- Description:
THE FOUNDATION FOR A HIGH-REVVING 350 SMALL-BLOCK!
Our SP350/385 crate engine incorporates modern technologies such as a beehive-type valve springs to take the classic 350 Small-Block to new levels of high-rpm performance - without sacrificing the signature torque that has made it the benchmark of V-8 engines for nearly half a century.
In fact, the 385 hp rating of the engine is complemented by excellent low-rpm torque, with the SP350/385 generating 405 lb.-ft. of torque at 3,600 rpm. It's all due to the high-flow, lightweight aluminum cylinder heads. They're based on the proven Fast Burn design, with large intake runners and 2.00/1.55-inch valves. The beehive valve springs enable greater high-rpm performance and durability, allowing the engine to rev higher to make the most of every cubic foot of air drawn through it.
As with all of Chevrolet Performance's Small-Block crate engines, the SP350/385 is built with a cast-iron block with four-bolt mains. It also features a forged steel crankshaft, an aggressive hydraulic roller camshaft and durable, highsilicon pistons. In this value-driven Base crate engine package, it also includes the intake manifold, distributor, water pump, damper and flexplate. Other accessories are required to finish it - all available from Chevrolet Performance.
TECH SPECS
Part Number: 19333157
Engine Type: Chevy Small-Block V-8
Displacement (cu in): 350
Bore x Stroke (in): 4.000 x 3.480
Block (P/N 10243870): Cast-iron with 4-bolt main caps
Crankshaft (P/N 12670965): Forged steel (shot peened)
Connecting Rods (P/N 10108688): Powdered metal
Pistons (P/N 10159436): Hypereutectic aluminum
Camshaft Type (P/N 10185071): Hydraulic roller
Camshaft Lift (in): .474 intake / .510 exhaust
Camshaft Duration (@.050 in): 208° intake / 221° exhaust
Cylinder Heads (P/N 19300955): Fast Burn aluminum; 62cc chambers
Valve Size (in): 2.000 intake / 1.550 exhaust
Compression Ratio: 9.6:1 nominal
Rocker Arms (P/N 10089648): Stamped steel
Rocker Arm Ratio: 1.5:1
Recommended Fuel: Premium pump
Ignition Timing: 36? Total @ 4,000 rpm
Maximum Recommended rpm: 5,800
Balanced: External
Flexplate (P/N 14088765): 12.750"
Intake Manifold (P/N 12366573): Dual Plane
INSTALLATION NOTES- Use the Holley 770-cfm 4-barrel carburetor P/N 19170093 to achieve the listed horsepower and torque
- Requires four-barrel carburetor, spark plug wires and additional components to complete assembly
- Comes with 12.750" externally balanced 153-tooth automatic transmission flexplate. Requires externally balanced flywheel for manual transmission.
- Requires fuel line from fuel pump to carburetor
- Designed for pre-1976 street vehicles or any off-road vehicle
- Some assembly and minor engine tuning required
- Not intended for marine applications
- Replaces:
19333157, 19417618, 19417624, 19432101, 19433039
California Proposition 65
WARNING: Cancer and reproductive harm - www.P65Warnings.ca.gov Also Purchased
Vehicle Fitment
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|
Product Reviews
GMOutletParts.com
GMOutletParts.com operates one of the largest and most professional GM parts warehouses in the country. Our highly experienced parts team is available to answer all of your GM parts questions and ensure your satisfaction with every aspect of your purchase.
As a owner, you want nothing but the best to be installed in your vehicle.
If a part is not in stock (when your order status says ON ORDER) and must be ordered from the manufacturer, it usually takes 2-3 days to arrive to us and will be promptly shipped to you. Most of the orders are shipped complete within 2-3 business days. A few of the parts ordered from the manufacturer may take up to 5-6 business days to arrive and will shipped to you immediately.
Whatever part you need, we're here for you. As a proud GM owner, you deserve to have your vehicle running at its peak performance levels. If you have any issues finding the parts you need, please contact us!
Please note Positions: Right mean Passenger side, and Left means Driver side.
Parts DO NOT COME PAINTED!
The material on this website is provided by a third party and could contain technical inaccuracies, shipping quote incorrect, inaccurate description, pricing, illustration or other errors. The illustrations in this catalog may use one illustration for both the left (driver) and right (passenger) side and are to be used as a guide only. Actual product may differ from what is shown. Please contact us for correct part numbers, part information, shipping quote or part availability prior to ordering. This website does not reflect our current on hand inventory. Prices on this website are for online purchases only. This site is not owned or operated by GM.
GM
GM is the world leader in automobile manufacturing. All GM genuine replacement parts are guaranteed to meet all of the manufacturers specifications and carry the same warranty as with GM vehicles. For more information contact our GM parts staff for assistance.
Some things to remember:
Most of the illustrations contained in this online parts catalog are just simple renditions of the part and where it may be located on the vehicle, it is for reference only.
There are many factors such as trim, color, and options that will not be depicted in the illustrations.
We provide free parts fitment verification when you include your vehicle's VIN at checkout.
This GM catalog is for reference only and does not guarantee availability of parts.
GM Parts and Accessories are the best quality and are what came on your vehicle when new.